Siser – Heat Resistant Tape

10-6 INCH x 12 INCH sheets of Siser TTD Easy Mask for use with printed pattern heat transfer vinyl (NOT intended for use with Siser Easysubli). Siser’s clear TTD mask allows you to accurately place your design on your garment and releases easliy after heat application. Use TTD Easy Mask for the best application results!

FEATURES:
*Qty-Size: 10-6″x12″ sheets
*Possible to reuse 2-3 times
*Actual sheet size may vary +/- 1/4″

INSTRUCTIONS:
*Cut a piece of mask slightly wider than the image.
*Remove the paper backing from the mask and set aside.
*Sticky side up, place the mask down on a smooth, firm surface.
*With your cut design facing down, center it over the mask letting the middle drop down onto the adhesive, followed by the rest of the design.
*Place your squeegee at a 45° angle over the center of the image. Using firm pressure, push the squeegee towards the outer edge of the image. This removes any trapped air creating a bond between the image and the mask.
*Repeat this process in several directions.
*Lift a corner of the mask, use a steady motion to separate the mask from the image.
*Design is ready to press on garment.
*If not pressing immediately, place the transferred image back on the shiny side of the original masking paper you had set aside.

FOR USE WITH:
*Printed HTV
*Pattern HTV
*Patterned HTV
*Printed HTV Vinyl